EVOpass® 40
REF: PL40
Biometric fingerprint reader with DESFIRE® proximity reader, allowing in this case access with the combination of both technologies:
- Fingerprint only
- Card only
- Keypad only
- Fingerprint and card
- Fingerprint on card
- BLE only
This reader can read the CSN (Chip Serial Number) of the card, as well as read-write data in the card's memory. Access to this data can be through a cryptographic key for a more secure transaction of the information (Grade 4 Access).
It can include a 12-key keypad that allows dual factor identification with card and code. In addition, this reader has a biometric sensor that reads through an optical sensor with a resolution of 500 dpi.
The reader can store up to 2 fingerprints per user and can be supplied (1:n operation) with capacity for 3,000 or 5,000 users.
Features
General characteristics
Manufactured in high resistance ABS Polycarbonate.
Highly intuitive interface based LED lights in different colours: Blue, red and green. A buzzer is also incluided.
Option to install both indoors and outdoors.
Available proximity technology Mifare ® Desfire ® ISO14443A (13,56 MHz) with card read/write capability.
Recommended for both centrally operated and DOC (Dorlet On card) access control installations.
Surface-mounted on universal electrical mechanism box.
Can be connected to any DORLET controller.
EVOpass® 40B - Grade 4 (D5142104)
Biometric fingerprint reader that complies with Grade 4 standards for both Access (EN-60839) and Intrusion (EN-50131).
EVOpass® 40BK (D5152100)
Biometric fingerprint reader also equipped with a keypad (12 keys). It can be used for double identification factor access control.
EVOpass® 40BK - Grade 4 (D5152104)
Biometric fingerprint reader also equipped with a keypad (12 keys). It can be used for double identification factor access control.
This model complies with Grade 4 standards for both Access (EN-60839) and Intrusion (EN-50131).
EVOpass® 40B - BLE (D5144100)
Biometric fingerprint reader that also allows access using DMA (DORLET Mobile Access), DORLET's virtual credential, thanks to BLE technology.
EVOpass® 40B - BLE - Grade 4 (D5144104)
Biometric fingerprint reader that also allows access using DMA (DORLET Mobile Access), DORLET's virtual credential, thanks to BLE technology.
This model complies with Grade 4 standards for both Access (EN-60839) and Intrusion (EN-50131).
EVOpass® 40BK - BLE (D5154100)
Biometric fingerprint reader that also allows access using DMA (DORLET Mobile Access), DORLET's virtual credential, thanks to BLE technology. In addition, this reader incorporates a keypad with 12 keys for entering an access code.
EVOpass® 40BK - BLE - Grade 4 (D5154104)
Biometric fingerprint reader that also allows access using DMA (DORLET Mobile Access), DORLET's virtual credential, thanks to BLE technology. In addition, this reader incorporates a keypad with 12 keys to enter an access code.
This model complies with Grade 4 standards for both Access (EN-60839) and Intrusion (EN-50131).
Especificaciones
TECHNICAL
- Bluetooth: Bluetooth Low Energy (BLE) v5.0
- Writing option: Yes
- Reading mode: Proximity MIFARE® DESFire®
- Material: Polycarbonate + ABS
- Dimensions: 148 x 84,82 x 53,62 mm
- Maximum consumption: 300 mA
- Connection: 4 wires (see cable type in manual)
- Biometric capacity (1 or 2 fingerprints): 3.000, 5.000 or no limit (fingerprinting on card)
- Power: 12 Vdc
- Operating range: From -10ºC to 55ºC (up to 93% humidity)
- Finish: Black
- NFC reading range (R/W): Up to 5 cm. (3 cm.)
- Signalling: Blue-red-green LED light and buzzer
- Biometric sensor: Optical technology (STM32L4 processor)
- Keypad: Optional
- Bio sensor size: 15 x 22 mm.
Data Sheet
Preguntas frecuentes
The EVOpass® 40 has the same technologies as the EVOpass® 20 but also incorporates a biometric sensor for fingerprint reading.
You can contact the DORLET® technical support team via the support form on our website and we will get back to you as soon as possible.
Related products
Within the same category
No results found