ASD/2 Controller
REF: D1221001
The ASD/2 ACU can control up to 2 entrances/exits of elements installed in the field and manage them integrally from the DORLET® control software, DASSnet®.
It should be noted that this Access Control Unit (ACU) offers access control, intrusion, time and attendance control functions, so that it can be adjusted to the specific needs of each installation.
This UCA is TCP/IP so it can communicate in real time with the server and operate in stand-alone mode, thanks to an internal database capable of storing, processing and validating information when communication with the server is not possible.
Features
General Characteristics
2 complete access and/or time attendance readers and one auxiliary RS232 reader for connecting licence plate readers, printers,displays...
High-capacity: 100,000 employee cards, 2,500 visitor cards, 10,000 car licence plates, 10,000 access transaction logs, 1,000 alarm transaction logs...
2 outputs (configurable) for electric lock.
2 magnetic contact inputs for readers, 2 exit button inputs for door opening, and 2 inputs for reader inhibition.
8 supervised general purpose inputs (withstand by detection, alarms, short-circuit,open circuit, antimasking, and sensor failure,2 of them configurable as analogues).
8 digital outputs by relay for general purposes.
Lid Tamper: The box has a tamper for detecting if the lid has been opened.
The controller provides the power supply for readers as well as locks and associated sensors (consult the consumption of each element).
The controller allows reprogramming, updating and changing its FLASH memory through TCPI-IP.
RAM memory with battery for power cutsand data retention.
The inputs and outputs can be distributed depending on the controller ́s configuration(barriers, turnstiles...) thus allowing the control of traffic lights, induction loops, etc. Consult the installation manual.
Supervised inputs allow the detection of: short-circuit, antimasking, sensor error, open-circuit, standby and alarm.
ASD/2 - VoIP (D1221101)
This version has an expansion board that allows you to manage equipment equipped with intercom.
ASD/2 - IoIP (D1221201)
This version has an expansion board that allows you to manage equipment equipped with video intercom.
ASD/2 - PoE+ (D1222001)
This version includes power via PoE+.
ASD/2 - PoE+ VoIP (D1222101)
This version has an extension board that allows you to manage devices equipped with intercom. It also includes power supply via PoE+.
ASD/2 POE+ IoIP (D1222201)
This version has an extension board that allows you to manage devices equipped with video intercom. It also includes power supply via PoE+.
ASD/2 - Grado 4 (D1223001)
The ASD/2-G4 UCA complies with Grade 4 regulations for both Access (EN-60839) and Intrusion (EN-50131).
Box tamper: The box of the G4 version has a tamper for detecting if the box is being removed from the wall.
Grade 4 Power supply: power supply with 220VAC loss detection, low battery, battery error, low output tension and power supply error, fulfilling norm UNE-EN-50131.
12 vdc battery supply: the G4 controller comes with a 12 VDC and 7,2Ah assuring that the controller will work for at least 4 more hours since the power cut.
The controller box has a space to store a 12 VDC and 7,2 Ah (supplied with the G4 version).
ASD/2 - Grado 4 VoIP
The UCA ASD/2-G4 complies with Grade 4 regulations for both Access (EN-60839) and Intrusion (EN-50131).
This version has an extension board that allows the management of equipment equipped with intercom.
ASD/2 - Grado 4 IoIP
The UCA ASD/2 - G4 complies with Grade 4 regulations for both Access (EN-60839) and Intrusion (EN-50131).
This version has an extension board that allows the management of equipment equipped with video intercom.
Especificaciones
PHYSICAL
- Box dimensions: 380x300x120
- ASD/1 board dimensions: 100x183x30
- Power supply dimensions: 82x99x36
- Controller weight: 3,4 kg
- Protection: IP56
POWER SUPPLY
- Through POE+: No
- Power supply input: 88-264 VAC, 47/63 Hz
- GRADE 3 Power Supply: No
- Available power: 35 Watt
- Power supply outputs: 5V DC. and 12V DC.
- Battery outputs: Yes (13,8 VDC.)
- Grade 3 signal: No
COMMUNICATIONS
- Encriptation: AES-128
- TCP-IP: 10/100 Mbps., connector RJ-45, TELNET server for communications con- figuration
ELECTRONICS
- Remote update: Yes (through TCP-IP)
- Specifications: 96 MHz., 32-bit core
- Memory: RAM 8 Mbyte.
- Microcontroller: Renesas RX63N
- Clock: In real time
- Data retention: Battery to preserve RAM (1 month)
- Program memory: Flash 768 Kbytes.
IMPUTS AND OUTPUTS
- Digital imputs: 8 (2 buttons, 2 magnetic locks, 2 reading inhibition, 1 mailbox).
- Bus extension: I2C (for I/O extension boards)
- Auxiliary imputs: 1 RS232 (car license plates, printers tickets, displays...)
- Supervised digital inputs: 8 (2 of these can be configured as analogue).
- Reader imputs: 2 (1 door with entry/exit or 2 doors with just entry).
- Lock outputs: 2 (configurable NA/NC nd with/without voltage).
- Digital outputs: 8 (2 of them by relay).
- Power supply output: 2 (5 VDC. and 12 VDC for sensor supply)
CAPACITIES
- Employee cards: 100000
- Visitor cards: 2500
- Vehicle license plates: 10000
- Access transaction logs: 10000
- Alarm transaction logs: 1000
- Extended timetables with 7 type of days: Yes
- Timetableswith 3 type of days: Yes
- Alarm timetables: Yes
- Automatic opening timetables: Yes
- PIN removal timetables: Yes
OTHER
- Audio/Video: No
- Audio Intercom: No
CERTIFICATIONS
- Battery 12 VDC: No
- Tamper box: No
- Tamper cap: No
- UNE-EN 50131 Grade 4 - Intrusion: No
- UNE-EN 60839 Grade 4 - Access Control: No
Data Sheet
Preguntas frecuentes
Yes, the UCA ASD/2 allows the connection of up to 2 readers, using the configuration of 1 door with an entrance and an exit reader or 2 doors with an entrance reader and a free or push-button exit reader.
Yes, the UCA ASD/2 - G4 has Grade 4 Intrusion (EN-50131) and Access (EN-60839) certifications.
